|>What’s in The Box?|
|>Warranty and Manuals|
Ecosmart POU 3.5 is a point of use electric tankless water heater which is specifically designed for single sink applications.
The Ecosmart POU 3.5 provides a maximum flow rate of 0.5 gallons per minute and includes a sink aerator for mixing air in the water for maintaining the pressure. This under sink instant water heater measures 11 x 3 x 6 inches, compact size saves up to 12 cubic feet of storage space. On the front panel, this unit includes a digital temperature display in unit degree increments and a power on-off button. The temperature of the water is controlled by the flow rate of the water. This instant water heater should be used in areas where inlet water temperature is lower than 57°F. At this temperature, the water can be further heated up to 105°F providing 0.5 gallons of hot water. This water heater weighs 4 pounds and consumes 3.5 kW power while heating water.
Installation of the Ecosmart POU 3.5 water heater is very easy to install under the sink because of its smaller size. This unit includes one inlet for cold water (color-coded in blue) and one hot water outlet (color-coded in red). If you know basic plumbing, you can install the unit without any trouble. For the power supply, this under sink instant water heater needs a 120 volts outlet and 100 amp electrical panel connected to #10 AWG wire.
This instant water heater includes 1 Year Limited Warranty on electronics, exchanger, and elements. Warranty only covers the cost of the heater; does not cover labor or any incidental damages.
|Item model||POU 3.5|
|Item Weight||4 pounds|
|Product Dimensions||3 x 11 x 6 inches|
|Heating Capacity||3.5 kW|
|Temperature Range||57°F to 105°F at 3.5 gallons per minute|
|Warranty Description||1 Year Warranty on electronics, exchanger, an element. Warranty only covers the cost of the heater; does not cover labor or any incidental damages.|
What’s in The Box?
Ecosmart POU 3.5
A 0.5 gpm sink aerator
Installation of Bosch Tronic 3000 T is really simple. Plug it directly into any standard 120-volt outlet, make the pipe connections and get the hot water where ever you want it.
This under sink water heater has an inlet of cold water (color-coded blue), an outlet of hot water (color-coded red). Connect the blue inlet with cold water supply and the red outlet to the hot water faucet. This unit does not require pressure relief valve because it is an instant hot tankless water heater.
Mount the unit using the mounting brackets. Keep the pipes and the pressure valves vertically up while mounting.
This water heater requires 30 A circuit to run, use #10 AWG wires for hard wiring, and plug it into a 120-volt outlet.
Warranty and Manuals
No warranty included.
Manual:- Installation Manual [pdf ]
Other Content [pdf]
Specification Sheet [pdf ]