>Overview | |
>Product Description | |
>What’s in The Box? | |
>Installation | |
>Warranty and Manuals |
Overview
InSinkErator HWT-F1000S is an instant hot water tank, which includes the new water filtration system in addition to the
The InSinkErator HWT-F1000S is a 2/3 gallon compact stainless steel hot water tank, which dispenses 60 cups of 200˚F water per hour. This instant hot water tank measures 6-1/8 x 6-3/4 x 10-7/8 inches and the filter has 2-1/4 inches diameter and 12-1/2 inches height. Hence, this is nearly perfect to fit under your sink or to be mounted at your wall. This unit also has a temperature regulator on the front panel with which you can easily adjust the temperature (160 to 210 degrees F) of the water. The temperature regulator helps you to use the water without any worries of getting burnt. At its highest temperature, the instant hot water dispenser provides near-boiling water. This heater weighs 7.28 pounds and consumes 750 watts power while heating water.
Installation of the InSinkErator HWT-F1000S needs simple plumbing, and the necessities are included with the product. There is no need for tools for making tank connections. Hence, you need not worry about calling a plumber just for this very simple and easy task. You can mount the water heater anywhere using the mount through holes that are already provided. Just plug this under sink water heater in any American standard 120 volts outlet and you are ready to use this ready hot-water dispenser.
This system includes an exclusive ‘We Come to You’ 3-Year In-Home Limited Warranty on the tank and 1-Year on the filtration system. Therefore, the InSinkErator assures you the quality of the product and serves you easy return policies if you feel discontent.
Product Description
Item model | InSinkErator HWT-F1000S |
Item Weight | 7.28 pounds |
Product Dimensions | 6.8 x 6.2 x 11 inches |
Size | 2/3 Gallon |
Heating Capacity | 750 Watt |
Temperature Range | 160˚F to 210˚F |
Voltage | 120 volts |
Warranty Description | “We Come to You” 3-year for instant hot water tank and 1-year for the filtration system |
What’s in The Box?
- InSinkErator HWT Hot Water Tank
- F1000S Water Filter
- 1/4 inch Compression Fittings
- Two polyethylene tubes
- Y connector
- Two mounting screws
- Manual
Installation:
Select a spot under the sink to mount tank vertically within reach of both plumbing and electrical connections. The tank should be within 16″ or less of faucet water lines and within 30″ or less of a standard grounded outlet. Mount the hot water tank using the screws provided.
Without depressing the gray button, place the snap-connect fitting at the end of the blue tube onto the left fitting on the tank, pushing until it fits into place. Slip the flexible white 7/16″ tube over barbed steel fitting and slide down approximately 1/2″. Slip the clear 5/16″ tube over the smooth plastic fitting and slide down approximately 1/2″.
Mount filter head and bracket in a spot that allows for filter replacement. Insert a white 1/4″ tube into the inlet side of filter head until it stops. Press it again to ensure a secure fit. Insert the other white 1/4″ tube into the outlet side of filter head until it stops. Press it again to ensure a secure fit.
Insert the copper tubes from the dispenser into “Y” quick-connector using the plug for hot-only models. Connect the white 1/4″ tube from the right outlet on the filter head into the quick-connect fitting until it stops. Press it again to ensure a secure fit.
Check all the connections and plugin instant hot water tank. Do not turn on the empty hot water tank, fill it with water before turning it on.
For more help watch tutorial:- Installation Tutorial
Warranty and Manuals
We Come To You® 3-Year In-Home Limited Warranty on the tank; 1-Year on filtration system (Excludes replacement filter cartridges)
Leave a Reply