>Overview | |
>Product Description | |
>What’s in The Box? | |
>Installation |
Overview
Zinnor Hot Tank Electric Water Heater is the newly released water heater. It was first available on Amazon on October 19, 2017.
Zinnor is a premium quality water heater. It is made of high-quality plastic and metal materials which makes the water heater long lasting. This instant hot water heater measures 9.84 x 9.84 x 13.78 inches, a medium size water heater. The Zinnor water heater is a direct heating type water heater. It has a high efficiency and low power heating tube which helps to utilize the energy efficiently. This hot water tank has the capacity of 2.1 gallons (8 liters). The Zinnor water heater has a temperature regulator on the front panel for adjusting the temperature from 55°C (131°F) to 75°C (167°F). This instant hot under sink water heater consumes 1.5 kW power and also works on higher floors with low water pressure. It is an environment-friendly water heater, made of a green environmental material, it qualifies the international standards.
This hot water tank is very easy to install. Plug it directly into any standard 120-volt outlet, make the pipe connections and get the hot water at the point-of-use.
Product Description
Item model | Zinnor – M660400 |
Product Dimensions | 9.84 x 9.84 x 13.78 inches |
Size | 2.1 Gallon (8 Liters) |
Heating Capacity | 1.5 kW |
Temperature Range | 55°C (131°F) to 75°C (167°F) |
Voltage | 110 volts |
Warranty Description | N/A |
What’s in The Box?
- 1 x Body of the water heater
- 1 x Operation manual
Installation
Select a spot under the sink to mount tank vertically within reach of both plumbing and electrical connections. The tank should be within 16″ or less of faucet water lines and within 30″ or less of a standard grounded outlet. Mount the hot water tank using the screws.
This under sink water heater has an inlet of cold water (color-coded blue), an outlet of hot water (color-coded red). Connect the blue inlet with cold water supply and the red outlet to the hot water faucet.
Check all the connections and plugin instant hot water tank. Do not turn on the empty hot water tank, fill it with water before turning it on.
Leave a Reply